Product images are for illustration purposes only. Please see the product swatch for more details or contact us for a free sample.
Max Width: 140cm | Max Drop: 150cm
Designed to fit into your uPVC frames with no need for drilling
The width and drop for each blind must be clearly specified, to the nearest 0.1cm
For accurate measurements please use a metal tape measure, and take measurements in centimetres, to the nearest 0.1cm.
Allow for clearance of any tiles or rails within the window recess
PerfectFIT blinds are specially designed for UPVC windows and doors with a rubber bead, and measuring for them couldn’t be easier. All you need is a pen, a pad and a metal tape measure.
Check that the rubber beading does not extend into the glass area by more than 6mm
Window: Then measure the visible glass area of each window and door. Measure from the inside edges of the frame where the glass meets the rubber bead. You shouldn’t include any of the beading or rubber seals in your measurements. Measure the top, the middle and the bottom of the glass to the nearest mm and note down the shortest measurement.
Then simply repeat this step for the drop, measuring the left, the right and the centre. Again, take a note of the shortest measurement.
Bead Depth: Measure the depth of the window from glass to beading. To do this, simply place a credit card over the corner of the frame and use a metal ruler to take the measurement. This will usually be between 18 and 24mm.